Outback F6-3.0L DOHC (2006)
Wiper Blade: Service and Repair
Removal and Installation
Wiper Blade
REMOVAL
CAUTION: When replacing wiper blades or etc., be sure to stand up the driver side wiper arm first, then passenger side wiper arm next. Also, when
putting the wiper arms back, be sure to start with passenger side first, then driver side next. Doing this in the reverse order may result in damage of
passenger side wiper arm by hitting with driver side wiper blade.
1. FRONT
While pushing the locking clip (A) up, pull out the blade from arm to the arrow direction.
2. REAR
Turn the blade in the direction of arrow (A) and remove it from arm.
INSTALLATION
1. Install in the reverse order of removal.
2. Confirm that the clip is locked securely.