Outback L.L.Bean Edition AWD F6-3.0L (2002)
3. Connect brake pipes to their correct ABSCM & H/U connections.
Tightening torque: 15 Nm (1.5 kgf-m, 10.8 ft. lbs.)
4. Using cable clip, secure ABSCM & H/U harness to bracket.
5. Connect connector to ABSCM & H/U.
CAUTION:
^
Be sure to remove all foreign matter from inside the connector before connecting.
^
Ensure that the ABSCM & H/U connector is securely locked.
6. Install air intake duct.
7. Connect ground cable to battery.
8. Bleed air from the brake system.
