Outback L.L.Bean Edition AWD F6-3.0L (2002)
2. Apply thin coat of Molykote AS880N (Part No. 26298AC000) to the frictional portion between pad and pad inner shim.
CAUTION: Do not allow oil or grease to adhere to the sliding surface of pad and disc rotor.
3. Check disc rotor thickness and runout.
4. Install pads on support.
5. Install caliper body on support.
Tightening torque: 39 Nm (4.0 kgf-m, 28.9 ft. lbs.)
NOTE: If it is difficult to push piston during pad replacement, loosen air bleeder to facilitate work.
6. Depress brake pedal several times.
7. Check that brake fluid level is at max. line.
