Outback L.L.Bean Edition AWD F6-3.0L (2002)
Brake Hose/Line: Service and Repair
Brake Hose
REMOVAL
1. FRONT BRAKE HOSE
1. Separate brake pipe from brake hose.
NOTE: Always use flare nut wrench and be careful not to deform flare nut.
2. Pull out clamp to remove brake hose.
3. Remove bolt at strut and union bolt.
2. REAR BRAKE HOSE
1 of 2
2 of 2
1. Separate brake pipe from brake hose.
NOTE: Always use flare nut wrench and be careful not to deform flare nut.
2. Pull out clamp to remove brake hose.
