Outback L.L.Bean Edition AWD F6-3.0L (2002)
Radiator: Testing and Inspection
INSPECTION
1) Remove radiator cap, top off radiator, and attach tester to radiator in place of cap.
2) Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to radiator to check if:
1) Engine coolant leaks at/around radiator.
2) Engine coolant leaks at/around hoses or connections.
CAUTION:
^
Engine should be off.
^
Wipe engine coolant from check points in advance.
^
Be careful to prevent engine coolant from spurting out when removing tester.
^
Be careful also not to deform filler neck of radiator when installing or removing tester.
