Outback L.L.Bean Edition AWD F6-3.0L (2002)
Engine Oil: Testing and Inspection
INSPECTION
1) Park vehicle on a level surface.
2) Remove oil level gauge and wipe it clean.
3) Reinsert the level gauge all the way. Be sure that the level gauge is correctly inserted and in the proper orientation.
4) Remove it again and note the reading. If the engine oil level is below the "L" line, add oil to bring the level up to the "F" line.
5) After turning off the engine, wait a few minutes for the oil to drain back into the oil pan before checking the level.
6) To prevent overfilling the engine oil, do not add oil above the "F" line when the engine is cold.
