Outback L.L.Bean Edition AWD F6-3.0L (2002)
Oil Filter: Service and Repair
REMOVAL
1) Drain engine oil by loosening engine oil drain plug.
2) Remove access lid.
3) Remove oil filter with ST
ST 498547000 OIL FILTER WRENCH
INSTALLATION
1) Get a new oil filter and apply a thin coat of engine oil to the rubber seal.
2) Install oil filter by turning it by hand, being careful not to damage rubber seal.
3) Tighten more (approximately 3/4 turn) after the rubber seal contacts the oil cooler. Do not tighten excessively, or oil may leak.
4) Fill engine oil.
