Outback L.L.Bean Edition AWD F6-3.0L (2002)
-
Each connector is indicated by a symbol.
-
Each terminal number is indicated in the corresponding wiring diagram in an abbreviated form.
-
For example, terminal number "C2" refers to No.2 terminal of connector (C: F41) shown in the connector sketch.
6. CONNECTOR SKETCH
-
Each connector sketch clearly identifies the shape and color of a connector as well as terminal locations. Non-colored connectors are indicated
in natural color.
-
When more than two types of connector number are indicated in a connector sketch, it means that the same type connectors are used.
7. GROUND
Each grounding point can be located easily by referring to the corresponding wiring harness.
8. DIODE
A symbol is used to indicate a diode.
9. WIRE TRACING ON EXTENDED WIRING DIAGRAMS
For a wiring diagram extending over at least two pages, a symbol (consisting of the same characters with arrows), facilitates wire tracing from one
page to the next.
A <--> A, B <--> B
10. SYMBOLS OF WIRE CONNECTION AND CROSSING
11. POWER SUPPLY ROUTING
A symbol is used to indicate the power supply in each wiring diagram.
"MB-5", "MB-6", etc., which are used as power- supply symbols throughout the text, correspond with those shown in the POWER SUPPLY
ROUTING in the wiring diagram.
Accordingly, using the POWER SUPPLY ROUTING and wiring diagrams permits service personnel to understand the entire electrical
arrangement of a system.
12. CLASSIFICATION BY SPECIFICATION
When wiring diagrams differ according to vehicle specifications, the specification difference is described by using abbreviations.
13. HARNESS REPAIR KIT
The connector adapting to Harness repair kit is shown as "HR" in the right-upper of connector number.
