Outback L.L.Bean Edition AWD F6-3.0L (2002)
Oil Pressure Sender: Service and Repair
REMOVAL
1) Set vehicle on the lift.
2) Disconnect battery ground cable.
3) Lift-up the vehicle.
4) Remove under cover.
5) Disconnect terminal from oil pressure switch.
6) Remove oil pressure switch.
INSTALLATION
1) Apply fluid packing to oil pressure switch threads.
Fluid packing: THREE BOND 1324 or equivalent
2) Install oil pressure switch.
Tightening torque: 25 Nm (2.5 kgf-m, 18.1 ft. lbs.)
