subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Spark Plug|Removal and Installation|Page 1451 > < Spark Plug|Removal and Installation|Page 1449
Page 4
background image

Tightening Torque (Ignition coil):  16 Nm (1.6 kgf-m, 12 ft-lb)

LH SIDE

1. Install in the reverse order of removal. 

Tightening Torque (Spark plug):  21 Nm (2.1 kgf-m, 15 ft-lb)

CAUTION:  The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the
torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

Tightening Torque (Ignition coil):  16 Nm (1.6 kgf-m, 12 ft-lb)

Spark Plug|Removal and Installation|Page 1451 > < Spark Plug|Removal and Installation|Page 1449