Outback L.L.Bean Edition AWD F6-3.0L (2002)
10. Remove bolts which hold front exhaust pipe onto cylinder heads.
11. Remove front exhaust pipe from hanger bracket.
CAUTION: Be careful not to pull down front exhaust pipe.
12. Separate front catalytic converter (RH) from front exhaust pipe.
NOTE: The rear catalytic converter is integrated with front catalytic converter. Therefore, the procedure for removing rear catalytic converter is
the same as the description above.
INSTALLATION
NOTE: Replace gaskets with new ones.
1. Install front catalytic converter (RH) to front exhaust pipe.
