Outback L.L.Bean Edition AWD F6-3.0L (2002)
3) Temporarily tighten bolt which installs front exhaust pipe assembly to hanger bracket.
4) Tighten bolts which hold front exhaust pipe onto cylinder heads.
Tightening torque: 30 Nm (3.1 kgf-m, 22.4 ft. lbs.)
5) Install under cover.
6) Tighten bolts which install front exhaust pipe to rear exhaust pipe.
Tightening torque: 18 Nm (1.8 kgf-m, 13.0 ft. lbs.)
7) Tighten bolt which holds front exhaust pipe assembly to hanger bracket.
Tightening torque: 35 Nm (3.6 kgf-m, 26.0 ft. lbs.)
8) Connect rear oxygen sensor connector.
9) Lower the vehicle.
