Outback L.L.Bean Edition AWD F6-3.0L (2002)
the specified torque with a torque wrench. If only one wrench is used to tighten, the tightening torque will be excessive or insufficient. This may
cause a pipe distortion or gas leak, resulting in damage to hoses and pipes.
-
After tightening, using a clean shop towel to remove excess oil from the connections and any oil which may have run on the vehicle body or other
parts.
-
If any leakage is suspected after tightening, do not retighten the connections, Disconnect the connections, remove the O-rings, and check the
O-rings, threads, and connections.