Outback L.L.Bean Edition AWD F6-3.0L (2002)
Heater Core Case: Service and Repair
Heater Unit
REMOVAL
1. Disconnect ground cable from battery.
2. Drain coolant from the radiator.
3. Remove air cleaner case.
4. Release heater hose clamps in engine compartment to remove the hoses.
5. Remove A/C unit. <Ref. to REMOVAL, Intake Unit.>
6. Using a Torx wrench, remove airbag control unit.
7. Disconnect connector of airbag main harness near steering support beam.
8. Loosen bolts and nuts of support beam to remove support beam.
9. Disconnect servo connector.