Outback L.L.Bean Edition AWD F6-3.0L (2002)
Headlamp Bulb: Service and Repair
REMOVAL
CAUTION:
-
Because the tungsten halogen bulb operates at a high temperature, dirt and oil on the bulb surface reduces the bulb's service life. Hold the flange
portion when replacing the bulb. Never touch the glass portion.
-
Do not leave the headlight without a bulb for a long time. Dust, moisture, etc. entering the headlight may affect its the performance.
1. SINGLE-BULB TYPE
1. Disconnect ground cable from battery.
2. Remove duct (A) (when right side headlight is removed).
3. Disconnect harness connector.
4. Remove rubber cover.
5. Push to remove spring retainer, and then detach the headlight bulb.
2. DUAL-BULB TYPE
1. Disconnect ground cable from battery.
2. Remove duct (A) (when right side headlight is removed).
3. Remove back cover (A).
4. Disconnect harness connector.