Outback L.L.Bean Edition AWD F6-3.0L (2002)
Diode: Testing and Inspection
INSPECTION
DIODE
CAUTION: Never use a megatester (measuring use for high voltage) or any other similar measure for this test; otherwise, the diodes may be damaged.
1. Checking positive diode
Check for resistance of 1 Ohm or less between the diode lead and the positive side heat sink. The positive diode is in good condition if resistance
is 1 Ohm or less only in the direction from the diode lead to the heat sink.
2. Checking negative diode
Check for resistance of 1 Ohm or less between the negative side heat sink and diode lead. The negative diode is in good condition if resistance is 1
Ohm or less only in the direction from the heat sink to the diode lead.
