Outback L.L.Bean Edition AWD F6-3.0L (2002)
Fuel Temperature Sensor: Service and Repair
REMOVAL
WARNING:
-
Ground cable must be connected.
-
Spark may occur and ignite if fuel is nearby.
-
During work procedures, if fuel tank is more than 3/4 full, be careful because fuel may spill.
NOTE: Fuel temperature sensor is built in fuel pump assembly.
1. Remove fuel pump assembly.
2. Disconnect connector from fuel pump bracket.
3. Remove fuel temperature sensor.
NOTE: When replacing fuel temperature sensor, also replace fuel level sensor.
INSTALLATION
1. Install in the reverse order of removal.
