subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

ABOUT US
Throttle Body > < Engine Controls - Throttle Position Sensor|Page 2561

Outback L.L.Bean Edition AWD F6-3.0L (2002)

Page 1
background image

Throttle Position Sensor: Service and Repair

REMOVAL

1. Disconnect battery ground cable. Remove air intake chamber. <Ref. to REMOVAL, Air Intake Chamber.>
2. Disconnect connector from throttle position sensor.

3. Remove throttle position sensor holding screws, and remove throttle position sensor itself.

INSTALLATION

Install in the reverse order of removal.

Tightening Torque:  1.6 Nm (0.16 kgf-m, 1.2 ft-lb)

Throttle Body > < Engine Controls - Throttle Position Sensor|Page 2561