Outback L.L.Bean Edition AWD F6-3.0L (2002)
Crankshaft Position Sensor: Description and Operation
-
The crankshaft position sensor is installed on the rear end of the cylinder block. The sensor generates a pulse when one of the teeth on the
perimeter of the crankshaft plate (rotating together with the crankshaft) passes in front of it. The ECM determines the crankshaft angular position
by counting the number of pulses.
-
As the crankshaft rotates, each tooth of the crankshaft plate aligns with the crankshaft position sensor so that the magnetic flux in the sensor's coil
changes since the air gap between the sensor pickup and the crankshaft plate changes. This change in magnetic flux induces a voltage pulse in the
sensor and the pulse is transmitted to the ECM.
