subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Ignition System - Spark Plug Replacement Intervals|Page 2023 > < Ignition System - Spark Plug Replacement Intervals|Page 2021
Page 1
background image

Spark Plug: Specifications

SPECIFICATIONS

Spark Plug Thread Size ....................................................................................................................................................................................... 14, P = 1.25

Spark Plug Spark Gap ....................................................................................................................................................................... 1.0 - 1.1 (0.039 - 0.043)

SPARK PLUG

RH SIDE

Tightening Torque (Spark plug):  21 Nm (2.1 kgf-m, 15 ft-lb)

CAUTION:  The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque
should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

Tightening Torque (Ignition coil):  16 Nm (1.6 kgf-m, 12 ft-lb)

LH SIDE

Tightening Torque (Spark plug):  21 Nm (2.1 kgf-m, 15 ft-lb)

CAUTION:  The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque
should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

Tightening Torque (Ignition coil):  16 Nm (1.6 kgf-m, 12 ft-lb)

Ignition System - Spark Plug Replacement Intervals|Page 2023 > < Ignition System - Spark Plug Replacement Intervals|Page 2021