Outback L.L.Bean Edition AWD F6-3.0L (2002)
Impact Sensor: Service and Repair
Sensor Connectors
FRONT SUB SENSOR AND SIDE AIRBAG SENSOR CONNECTORS
Disconnection:
Holding the outer part (A), pull the connector in the direction of the arrow.
Connection:
Holding the inner part, push the connector into the socket carefully until a click is heard.
Do not hold the outer part (A) as it moves back during connection of the connector.
How to disconnect:
1. Push lock arm (A).
2. With lock arm (A) pushed in, move slide lock (B) in the direction of the arrow.
3. With slide lock (B) pulled, remove lock arm (A) to its original position, and then pull in the direction of the arrow and separate the connector.
