Outback L.L.Bean Edition AWD F6-3.0L (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Seat Belt System
INSPECTION
Check for the following, and then replace with new parts if necessary.
-
Center pillar lower garnish is discolored or cracked
-
Wire harness and/or connector is damaged.
OUTER BELT (FRONT)
Check for the following, and replace with new parts if necessary.
-
Pretensioner is cracked or deformed.
-
Seat belt is slackened, bent, or frayed. Seat belt is abnormally wound or extended.
INNER BELT (FRONT)
Check for the following, and replace with new parts if necessary.
-
Inner belt is deformed or damaged.
-
Seat belt buckle is engaged improperly.
OUTER BELT CENTER / SIDE
Check for the following, and replace with new parts if necessary.
-
Seat belt is slackened, bent, or frayed.
-
Seat belt is abnormally wound or extended.
INNER BELT
Check for the following, and replace with new parts if necessary.
-
Inner belt is deformed or damaged.
-
Seat belt buckle is engaged improperly.
