Outback L.L.Bean Edition AWD F6-3.0L (2002)
6. Turn over the floor mat to remove bolt.
7. Disconnect yellow connector of pretensioner harness, and remove outer belt (front).
CAUTION: Do not drop or apply any impact to pretensioner.
Pretensioner and bracket should be treated as an assembly. Do not attempt to disassemble it.
INSTALLATION
Install in the reverse order of removal.
CAUTION: The parts on left and right are not identical. Before installation, make sure that the correct part is used
Be careful not to twist belts during installation.
Inner Belt
INNER BELT (FRONT)
REMOVAL
1. Disconnect connector.
2. Remove anchor bolt, and then detach inner belt.
INSTALLATION
Install in the reverse order of removal.
