Outback L.L.Bean Edition AWD F6-3.0L (2002)
NOTE: Tighten the bolts evenly.
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
6. Turn over the transmission case to its original position.
7. Install torque converter turbine speed sensor and front vehicle speed sensor.
Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
8. Install the rear vehicle speed sensor.
Tightening torque: 7 Nm (0.7 kgf-m, 5.1 ft. lbs.)
9. Remove the vinyl tape, and then install air breather hose.
10. Install the oil cooler pipes.
11. Install the oil charger pipe.
12. Install the torque converter clutch assembly.
13. Install inhibitor switch and adjust the inhibitor switch.
14. Install inhibitor switch connector and transmission connector to the stay.
15. Install pitching stopper bracket.
Tightening torque: 41 Nm (4.2 kgf-m, 30.4 ft. lbs.)