Outback L.L.Bean Edition AWD F6-3.0L (2002)
NOTE: Refer to the "SPECIFICATIONS" for the camber values.
^
Front Camber Adjustment
1. Loosen two self-locking nuts located at lower front portion of strut.
CAUTION:
^
When adjusting bolt needs to be loosened or tightened, hold its head with a wrench and turn self-locking nut.
^
Discard loosened self-locking nut and replace with a new one.
2. Turn camber adjusting bolt so that camber is set at the specification.
NOTE: Moving the adjusting bolt by one scale graduation changes camber by approximately 0°10'.