Outback L.L.Bean Edition AWD F6-3.0L (2002)
Power Steering Pump: Testing and Inspection
E: INSPECTION
1. BASIC INSPECTION
Perform the following inspection procedures and repair or replace defective parts.
^
In accordance with the above table, check all removed parts for wear and damage, and make repair or replacement if necessary.
2. SERVICE LIMIT
Make a measurement as follows. If it exceeds the specified service limit, replace the parts with new ones.
CAUTION:
^
Fix oil pump on a vise to make a measurement. At this time, hold oil pump with the least possible force between two wood pieces.
^
Do not set outside of flow control valve or pulley on a vise; otherwise outside or pulley might be deformed. Select properly sized wood pieces.
