Outback L.L.Bean Edition AWD F6-3.0L (2002)
Tightening torque: 15.7 Nm (1.6 kgf-m, 11.6 ft. lbs.)
2. Install socket to oil pump.
Tightening torque: 6.5 Nm (0.66 kgf-m, 4.8 ft. lbs.)
3. Tighten bolt which secures power steering pump bracket.
Tightening torque: 22 Nm (2.2 kgf-m, 15.9 ft. lbs.)
4. Interconnect pipes C and suction hose.
Tightening torque:
Joint nut 39.2 Nm (4 kgf-m, 28.9 ft. lbs.)
CAUTION: If a hose is twisted at this step, the hose may come into contact with some other parts.
5. Connect connector to power steering oil pressure switch.
6. Install pulley belt to oil pump.
7. Check pulley belt tension.
8. Tighten bolt belt tension.
Tightening torque: 8 Nm (0.8 kgf-m, 5.8 ft. lbs.)
9. Install pulley belt cover bracket.
10. Connect ground cable of battery.
11. Feed the specified power steering fluid.
