Outback L.L.Bean Edition AWD F6-3.0L (2002)
CAUTION: Never start the engine before feeding the fluid; otherwise vane pump might be seized up.
2. 3.0 l MODEL
1. Install oil pump to bracket.
1. Place oil pump bracket in a vise. Tighten bushing using a 12.7 mm (1/2") type 14 and 21-mm box wrench until it is in contact with oil pump
mounting surface.
CAUTION: Do not place oil pump bracket directly in the vise; use soft pads and hold oil pump lightly to protect the pump.
2. Tighten bolt which installs oil pump to bracket.
Tightening torque: 15.7 (1.6 kgf-m, 11.6 ft. lbs.)
Tightening torque: 37.3 (3.8 kgf-m, 27.5 ft. lbs.)
2. Tighten bolt which installs power steering pump bracket.