Outback L.L.Bean Edition AWD F6-3.0L (2002)
10. Remove hub unit bearing.
CAUTION: Be careful not to damage tone wheel.
If it is hard to remove, use STs.
ST1 926470000 AXLE SHAFT PULLER
ST2 927140000 PLATE
INSTALLATION
1. Align hub unit bearing with back plate at mounting holes and install hub unit assembly and back plate. Temporarily tighten axle nuts.
CAUTION: Be careful not to damage tone wheel.
2. Tighten four bolts to back plate.
3. Remove axle nut.
