Outback L.L.Bean Edition AWD F6-3.0L (2002)
Shift Cable: Testing and Inspection
INSPECTION
Check the removed cable and replace if damaged, rusty, or malfunctioning.
1. Check for smooth operation of the cable.
2. Check inner cable for damage and rust.
3. Check outer cable for damage, bends, and cracks.
4. Check boot for damage, cracks, and deterioration.
5. Move select lever from "P" position to "1" position. You should be able to feel the detents in each position. If the detents cannot be felt or the
position pointer is improperly aligned, adjust the cable.
