Outback L.L.Bean Edition AWD F6-3.0L (2002)
6. Remove solenoids, duty solenoids and ATF temperature sensor.
1. TRANSFER DUTY SOLENOID AND TRANSFER VALVE BODY
1. Set up the vehicle on the lift.
2. Disconnect battery ground terminal.
3. Remove air cleaner case or air intake chamber.
4. Remove pitching stopper.
5. Remove front exhaust pipe with center exhaust pipe.
6. Remove rear exhaust pipe and muffler.
7. Raise vehicle and drain ATF.
8. Remove heat shield cover.
9. Remove propeller shaft.
10. Remove rear crossmember.
(1) Support transmission using a transmission jack and raise slightly.
