Outback L.L.Bean Edition AWD F6-3.0L (2002)
4. Attach the magnet at the specified position.
5. Apply proper amount of liquid gasket to the entire oil pan mating surface.
Fluid packing: THREE BOND 1217B
6. Apply liquid gasket fully to 3 holes other than screw holes on the transmission case.
Fluid packing: THREE BOND 121 7B
7. Install the oil pan.
NOTE: Uniformly tighten the bolts in several passes.
Tightening torque: 5 Nm (0.5 kgf-cm, 3.6 ft. lbs.)
8. Pour ATF into the oil charge pipe.
Recommended fluid: Dexron III type automatic transmission fluid
Fluid capacity: 9.3 - 9.6 l (9.8 - 10.1 US qt. 8.2 - 8.4 Imp qt)
9. Check the level of the ATF.