Outback L.L.Bean Edition AWD F6-3.0L (2002)
Clutch Pedal Assembly: Service and Repair
Disassembling and Assembling
DISASSEMBLY
1. Remove clutch switches.
2. Remove clips, assist spring assembly and bushing.
3. Remove spring pin and lever.
4. Remove clutch pedal and bushing.
5. Remove stopper, clip, O-ring, rod S. and then remove spring and bushing S.
6. Remove stoppers from clutch pedal.
7. Remove clutch pedal pad.
ASSEMBLY
1. Attach stop light switch, etc. to pedal bracket temporarily.
2. Clean inside of bores of clutch pedal and brake pedal, apply grease, and set bushings into bores.