subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Service Manual - Multiple Systems Updates/Corrections|Page 3688 > < Service Manual - Multiple Systems Updates/Corrections|Page 3686
Page 1
background image

Control Module: Service and Repair

REMOVAL 

1. Disconnect battery ground cable.

2. Remove lower cover and then disconnect connector.
3. Disconnect connectors from transmission control module. 

MPT model

VT model

4. Remove transmission control module.

INSTALLATION 

1. Install transmission control module. 

Tightening torque: 7.5 Nm (0.76 kgf-cm, 5.5 ft. lbs.)

Service Manual - Multiple Systems Updates/Corrections|Page 3688 > < Service Manual - Multiple Systems Updates/Corrections|Page 3686