Outback [Legacy] AWD F4-2.5L DOHC (1996)
Coolant Line/Hose: Service and Repair
Installation
INSTALLATION
1) Install engine coolant pipe on cylinder block.
Tightening torque:
6.4 ± 0.5 Nm (0.65 ± 0.05 kg-m, 4.7 ± 0.4 ft-Ib)
CAUTION: Use a new 0-ring.
2) Connect radiator inlet hose.
3) Connect heater inlet hose.
4) Install intake manifold.
