Outback [Legacy] AWD F4-2.5L DOHC (1996)
7) Support engine with a lifting device and wire ropes.
8) Lift-up the vehicle.
CAUTION: At this time, raise up wire ropes.
9) Drain engine oil.
Set container under the vehicle, and remove drain plug from oil pan.
10) Disconnect connector from rear oxygen sensor. (Except California 2200 cc model)
11) Remove front exhaust pipe.
(1) Separate front catalytic converter from center exhaust pipe.
(2) Remove front exhaust pipe from engine.
(3) Remove bolt which installs front exhaust pipe on bracket.