Outback [Legacy] AWD F4-2.5L DOHC (1996)
Air Door Actuator / Motor: Description and Operation
Intake Door Control
Intake Door Control
Intake door motor is located on the upper part of the intake unit. It opens and closes the intake door with a rod and a link. When the RECIRC
switch is set to ON (the RECIRC indicator light), the ground line of the intake door motor is switched to terminal 2 from terminal 1, and the motor
starts to rotate because the position switch contacts built into it are set to the current flow position. The contacts turn along with the motor When
they reach the non-contact flow position, the motor will stop. The motor always turns in the same direction. When the RECIRC switch is set to
OFF (the RECIRC indicator does not light), follow the same operation. When the DEF or DEF/HEAT switch is set to ON (the RECIRC indicator
does not light), intake door is open (Fresh position).
