Outback [Legacy] AWD F4-2.5L DOHC (1996)
Hose/Line HVAC: Service and Repair
Flexible Hose
REMOVAL AND INSTALLATION
1. Disconnect battery negative terminal.
2. Discharge refrigerant using refrigerant recovery system.
3. Remove low-pressure hose.
1. Remove hose attaching bolts.
CAUTION: Plug the opening to prevent foreign matter from getting in.
2. Disconnect the connector at evaporator module.
4. Remove high-pressure hose.
1. Disconnect hose attaching bolt (compressor side).
2. Disconnect hose attaching bolt (condenser side).
CAUTION: Plug the opening to prevent foreign matter from getting in.
5. Installation is in the reverse order of removal.
6. Charge refrigerant.
