Outback [Legacy] AWD F4-2.5L DOHC (1996)
CAUTION:
-
When adjusting bolt needs to be loosened or tightened, hold its head with a wrench and turn self-locking nut.
-
Discard loosened self-locking nut and replace with a new one.
2) Turn camber adjusting bolt so that camber is set at the specification.
NOTE: Moving the adjusting bolt by one scale graduation changes camber by approximately 0010,.
3) Tighten the two self-locking nuts.
Tightening torque:
152 ± 20 Nm (15.5 ± 2.0 kg-m, 112 ± 14 ft-lb)
3. Front Wheel Toe-In
3. FRONT WHEEL TOE-IN
