Outback [Legacy] AWD F4-2.5L DOHC (1996)
1) Installation of belt tensioner adjuster
(1) Insert stopper pin 1.5 mm (0.059 in) dia. into place while pushing tension adjuster rod into body using a press.
CAUTION:
-
Do not allow press pressure to exceed 9,807 N (1,000 kg, 2,205 lb).
-
Do not release press pressure until stopper pin is completely inserted.
-
Push tension adjuster rod vertically.
-
Press-in the push rod gradually, taking three minutes or more.
(2) Temporarily tighten bolts while tension adjuster is pushed all the way to the right.
2) Install belt tensioner.
3) Install belt idler.
4) Install belt idler No.2.
