Outback [Legacy] AWD F4-2.5L DOHC (1996)
I: Wire Tracing On Extended Wiring Diagrams
For a wiring diagram extending over at least two pages, a symbol (consisting of the same characters with arrows), as shown below, facilitates wire
tracing from one image to the next.
A<-->A, B<-->B
J: Symbols Of Wire Connection And Crossing
Symbol Refers to wires which are connected and branched at the "dot" point.
Symbol Refers to wires which are crossed but not connected.
K: Power Supply Routing
A symbol is used to indicate the power supply in each wiring diagram.
"MB-5", "MB-6", etc., which are used as power supply symbols throughout the text, correspond with those shown in the POWER SUPPLY
ROUTING in the wiring diagram.
Accordingly, using the POWER SUPPLY ROUTING and wiring diagrams permits service personnel to understand the entire electrical
arrangement of a system.
L: S.M.J.
A symbol is used to indicate the terminal arrangement of the super multiple junction. The S.M.J. is not shown in respective wiring diagrams but is
indicated on the next image.
SYMBOLS AND ABBREVIATIONS
A number of symbols and abbreviations are used in each wiring diagram to easily identify parts or circuits.
Relays
Relays
10) Relays are classified as normally-open or normally-closed.
The normally-closed relay has one or more contacts.
The wiring diagram shows the relay mode when the energizing circuit is OFF.
Wire Color Code Identification
The following color codes are used to indicate the colors of the wires used.
