Outback [Legacy] AWD F4-2.5L DOHC (1996)
Alarm Module: Service and Repair
SECURITY CONTROL MODULE
Removal and Installation
1. Follow the same preparatory procedures when removing door lock timer. See: Body and Frame/Locks/Power Locks/Service and Repair
2. Remove nut which secures security control module, and remove security control module from bracket while pulling right side lower end of
instrument panel.
CAUTION: Be careful not to damage instrument panel while pulling right side lower end.
3. Disconnect connector from security control module.
4. Installation is in the reverse order of removal.
