Outback [Legacy] AWD F4-2.5L DOHC (1996)
8) Remove three bolts from the front side of oil pump and detach the pump.
9) Remove three bolts from the lower side of bracket and detach the bracket.
CAUTION: The bracket does not need to be removed unless It is damaged.
10) Place oil pump in a vise, remove two bolts from oil tank and detach oil lank.
CAUTION: Do not place oil pump directly in the vise; use soft pads and hold oil pump lightly to protect the pump.
Check
CHECK
In accordance with the following table, check all removed parts for wear and damage, and make repair or replacement if necessary.