Outback [Legacy] AWD F4-2.5L DOHC (1996)
2) Install packing on valve assembly. Insert valve assembly into place while facing rack teeth toward pinion.
CAUTION: Be sure to use a new packing.
NOTE: Do not allow packing to be caught when installing valve assembly.
3) Tighten bolts alternately to secure valve assembly.
Tightening torque:
25 ± 5 Nm (2.5 ± 0.5 kg-m, 18.1 ± 3.6 ft-Ib.)
CAUTION: Be sure to alternately tighten bolts.
