Outback Limited Wagon AWD F4-2.5L SOHC (2002)
Rear Door Panel: Service and Repair
Rear Sealing Cover
REAR SEALING COVER
REMOVAL
1. Remove rear door trim.
2. Remove rear speaker.
CAUTION:
-
Carefully remove butyl tape. Excessive force will easily break the cover.
-
If cover gets broken, replace it with a new one.
INSTALLATION
1. Install in the reverse order of removal.
2. When replacing sealing cover, use butyl tape.
3. Press sealer-applied area firmly to prevent any floating on surface.
Butyl tape: 3M8626 or equivalent
CAUTION:
-
Apply an uniform bead of butyl.
-
Attach sealing cover, keeping it from becoming wrinkled.
-
Breaks in the bead will allow water leakage and contamination.