Outback Limited Wagon AWD F4-2.5L SOHC (2002)
2. Install ATF cooler pipe to frame.
3. Connect ATF cooler hose to pipe transmission side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
4. Connect ATF cooler hose to pipe of radiator side.
NOTE:
^
Install so that the hose is not folded over, excessively bent, or twisted.
^
Be careful to insert the hose to the specified position.
5. Install the under cover.
6. Install battery and washer tank.
7. Fill ATF.
NOTE: Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.
2. 3.0L MODEL
