Outback Limited Wagon AWD F4-2.5L SOHC (2002)
8. Fit molding mark (B) to notch (A) of ceramic print.
9. Apply primer to adhesive layer of glass using sponge.
10. Apply primer to adhesive layer of body.
CAUTION:
-
Primer once attached to the painted surface of the body and internal trim is hard to wipe off.
Mask the circumference of such areas.
-
Let primer dry for about ten minutes before installing the glass.
-
Do not touch surface coated with primer.
11. Cut off cartridge nozzle tip and set it in sealant gun as shown.
12. Apply adhesive to glass end surface as shown.
