Outback Sport F4-2.5L (2010)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from camshaft position sensor.
3. Remove the bolt which secures camshaft position sensor to camshaft position sensor support.
4. Remove the bolt which secures camshaft position sensor support to camshaft cap LH.
5. Remove the camshaft position sensor and the camshaft position sensor support as a unit.
6. Remove the camshaft position sensor from the camshaft position sensor support.