Outback Sport F4-2.5L (2010)
5) Install rear sub-frame support bracket spacers and bushing inserts.
a) Remove only the left sub-frame support bracket and bolts.
CAUTION:
DO NOT remove both the right and left side brackets at the same time, otherwise the sub-frame can drop or alignment readings can be changed.
b) Insert the rear sub-frame mount bushing insert into the vacant side of the sub-frame mount bushing. Be sure that the bushing insert is fully seated
in the bushing; it should be flush when fully inserted.
Note:
There may be some excess or residual rubber inside the vacancy for the insert. If the insert does not fully seat in the bushing, use a flat blade screw
driver to break free the residual rubber.
