Outback Sport F4-2.5L (2010)
2) Place the steering wheel in a straight ahead position and adjust the tilt position to the lowest position and lock the tilt lever.
3) Disconnect the ground cable from the battery and wait for at least 60 seconds before starting work.
4) Loosen the two TORX® bolts on the sides of the steering wheel.
5) Disconnect the airbag connector and remove the airbag module assembly. Using a flat tip screwdriver; pry the push lock upward to unlock. Pull the
connector to disconnect from the driver's airbag module assembly.
6) Disconnect the horn wire connector (A) shown above.
